Filter Options
Required*
Filter
Columbus / Ohio / United States
0.0
National Electric Coil is a manufacturer of retrofitters for large motors, generators and related electrical equipment. The company is also a custom manufacturer of replacement coils. NEC offers coils and bars for turbine generators and high-voltage motors, including half-turn bars, inner gas and inner water-cooled bars and flexible end turn coils. HV stator windings for hydro generators, turbine generator rotor coils and hydro generator rotor poles are among the additional products manufactured by the company. Founded in 1917, the independently owned National Armature and Electric Works changed its name to National Electric Coil in 1934. The company is headquartered in Columbus, Ohio. A second facility is located in Brownsville, Texas.
Corona / California / United States
0.0
For more than 40 years, Corona Magnetics Inc. has been manufacturing a wide range of electro magnetic components. The company provides a wide array of products, such as transformers, inductors, specialty coils, precision self, supporting coils, etc. Corona Magnetics Inc. serves a wide range of market, such as medical, aerospace, military, commercial, communications and research and development. The company is facilitated with is a 17,000-square foot building custom. Corona Magnetics Inc. is located in Corona, Calif.
Oak Lawn / Illinois / United States
0.0

Taylor Spring manufactures and distributes custom springs, coils and wired forms. The company also offers coating, planting and special packaging for all manufactured parts, and prides itself on on-time delivery of all orders. Please call for additional information. 

Morrison / Illinois / United States
0.0
Garden Grove / California / United States
0.0
Wood Dale / Illinois / United States
0.0
Magnetic Coil Manufacturing Company, Inc was founded in 1945 and is a producer of high quality transformer and coil products. Magnetic Coil will be celebrating its 60th Anniversary in the spring of 2005 thanks to the support of our greatly appreciated customers. In addition, Magnetic Coil is a member of the I M A ( Illinois Manufacturers Association ), and also belongs to the E I A ( Electronic Industries Association ) with a source code of 933. Through the years Magnetic Coil has achieved a unique position by combining modern machinery, expert workers, quality materials, and a dedication to pleasing our customers. Magnetic Coil offers considerably more than our competitors. Magnetic Coil utilizes the latest in production and testing equipment, which enables production of superior quality components. Magnetic Coil handles large and small orders. Our Corporate Headquarters are located at 325 Beinoris Dr., IL 60191 Wood Dale Unit A - just West of the OHare Airport.
Wichita / Kansas / United States
0.0
Established in 1963, PWI Inc. specializes in the manufacture of lighting systems, coil winding and contract manufacturing services. Located in Wichita, Kan., the firm serves a wide range of industries, including the aircraft, agricultural, automotive, motorcycle and military sectors. In 1972, PWI Inc. pioneered in the production of cold cathode fluorescent lighting systems for aircrafts. The company designs, engineers and manufactures all types of electrical windings, such as transformers, inductors, magnetometers and tape-wound magnetic cores. Some of its clients include Boeing, Cessna Aircraft, Hawker/Beechcraft, Aeroflex, Gulfstream and Camplex.
Houston / Texas / United States
0.0
Electronic technology has set the pace for advancement in every industry. With components developed to make the world a more "user friendly" place, is it any surprise that these companies expect top-notch service? Major manufacturers of computer, audio-visual, and even environmental systems have come to trust Leeco. They choose Leeco because of our exceptional service record. From experimental research and development to stock springs and die supply, we always work to establish a close relationship with our clients so we can apply our experience to your needs. And computer access via the Harbinger-EDI system affords you immediate attention worldwide.Time is of the essence in the field of marine transport. When a major shipping corporation calls Leeco, it is understood that every day their ship is in lost productivity and revenues, and in port fees. At these times, the ultimate consideration is rapid turnaround. The parts needed must be fabricated and delivered immediately. Delays are not accepted, and quality must not be sacrificed. With their profits on the line, shippers know that Leeco can meet even the tightest timetable. Rapid, on-time delivery of quality products makes Leeco their choice.The area of medical devices and instrumentation is perhaps the most exacting of the applications in our products. When matters of life and death hang in the balance, precision workmanship is critical. The demanding requirements of the operating room allow zero tolerance for either flaws defects. Quality is not enough, and perfection is not a luxury; it is a prerequisite. These instruments are often prototypes as well. No other field of production is more trying... and none more satisfying. Leeco has remained on the cutting edge of both production and design in medicine, a fact proven by the presence of our products in the hands of many of todays finest surgeons.
Tyngsboro / Massachusetts / United States
0.0
Piconics designs and fabricates thin and thick film circuits and microelectronic inductive components for the aerospace, defense and commercial markets. The company provides chip resistors and attenuators, film substrates and circuits, fixed and spiral inductors, broadband conicals, microwave components and transformers. It manufactures circuits on a variety of substrates, including alumina, beryllia, aluminum nitride, silica quartz and ferrites. Piconics also offers sputtered, electroless and electroplated coating processes. The company is an ISO 9001:2000-certified manufacturer, and its military products meet the requirements of MIL-PRF-15305 and MIL-PRF-83446. Piconics test equipment consists of state-of-the-art instruments for measuring inductors and other reactive devices, such as phase shifters, filters and delay lines. The company was founded in 1963 and is based in Tyngsboro, Mass.
Walpole / Massachusetts / United States
0.0
We at M. V. Mason Electronics, Inc. have over 30 years experience in the custom manufacturing of state-of the-art inductors and transformers. We provide our customers with quality products while meeting individual customer production schedules. Transformers and inductors at M. V. Mason Electronics, Inc. are manufactured in a modern facility using the most advanced techniques and equipment available. We manufacture such products as toroidal, isolation, power, pot core, signal, switching and flyback transformers, as well as a wide selection of inductors and chokes. High standards in service at M. V. Mason Electronics, Inc. are a result of our quality conscious employees who take pride in meeting your product specifications.
Fort Wayne / Indiana / United States
0.0
Kalamazoo / Michigan / United States
0.0
Kenilworth / New Jersey / United States
0.0
Douglas / Arizona / United States
0.0
In business for over 40 years, Standex Electronics has been one of the leading manufacturers of custom electromagnetic components and equipment. Based in Douglas, Ariz., its product portfolio includes reed switches/relays, transformers/inductors, proximity sensors, antennas, coils, connectors and lighting products. The ISO/TS16949:2002 certified firm provides its solutions to a variety of markets, including military, aerospace, medical, general industrial and automotive, to name a few. Standex Electronics has associations with Aerospace Industries Association and The Transformer Association.
Casa Grande / Arizona / United States
0.0
Based in Casa Grande, Ariz., The M.C. Davis Company has been providing electronic components and electronic assemblies to OEM, military and industrial customers since 1968. Its serves markets, such as aerospace, consumer electronics, instrumentation and test equipment, medical, military and telecommunications. A wide variety of transformers, inductors and precision wound air coils are produced at its four plants owned by the company located in Arizona, Florida, Mexico and China. Magnetic components are manufactured to a variety of safety standards including UL, CSA and VDE. Its products include ferrite, laminated, powdered iron, toroidal materials, Thru-hole, SMT, self-leaded terminations, wire sizes from #10 AWG to #52 AWG.

Speed Links